Runco VX-2i Specifications download pdf (Page 17)

Controls and Functions

Runco VX-2i Owner’s Operating Manual 7

5. 12-VOLT (800 mA) TRIGGER OUTPUTS

Connection for up to three (3), 12-volt trigger-controlled devices. These can be

retractable screens, screen masks or the Runco CineWide with AutoScope system.

6. S-VIDEO 1 / S-VIDEO 2

Two, standard S-Video inputs for connecting a DVD player, satellite receiver or Super

VHS (S-VHS) VCR.

7. IR

Wired input from an external remote control.

8. RS-232 CONTROL PORT

A female, 9-pin D-sub connector for interfacing with a PC or home theater

automation/control system.

9. VACUUM FLUORESCENT DISPLAY

Can be used instead of the On-Screen Display (OSD). Displays currently-selected

menu or -- if no menu is selected -- the current source, signal format (NTSC or PAL),

input resolution and aspect ratio.

10. UP BUTTON

Use to direct select aspect ratios or move the menu cursor up in the On-Screen

Display. When no menus are present on-screen, the UP button toggles you through

aspect ratios in the following order:

Anamorphic - Standard (4:3) - Letterbox - VirtualWide - Cinema - Virtualwide 2.35

(Virtualwide 2.35 is available only on CineWide-equipped projectors. For more

information about aspect ratios, refer to

Table 4-1.)

11. LEFT BUTTON

Used to direct select inputs or move the menu cursor left in the On Screen Display.

When no menu is present on-screen, the LEFT button toggles you through the

different sources, in this order:

DVI 2 - DVI 1 - HD/RGB2 - HD/RGB1 - Component SD - S-Video 2 - S-Video 1 -

Composite

12. DOWN BUTTON

Use to direct select aspect ratios or move the menu cursor down in the On-Screen

Display. When no menu is present on-screen, this button toggles you through the

different aspect ratios, in this order:

Virtualwide 2.35 - Cinema - VirtualWide - Letterbox - Standard (4:3) - Anamorphic

13. ENTER BUTTON

When an item is highlighted on the On-Screen Display, the ENTER button selects the

item.

14. RIGHT BUTTON

Used to direct select inputs or move the menu cursor right in the On Screen Display.

When no menus are present on-screen, the RIGHT button toggles you through the

different sources, in this order:

Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 - DVI 1

- DVI

15. MENU BUTTON

Pressing the MENU button brings up the main menu. Also, if you are in an adjustment

mode or function, pressing MENU brings the menu back one level.

16. IR SENSOR

Receives the IR commands from the remote.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Comments to this Manuals

No comments

Runco VX-2i Specifications Page 17

Comments to this Manuals

Related products and manuals for Data projectors Runco VX-2i