Runco CX-57HD User Manual download pdf (Page 35)

Runco CX-52HD/CX-57HD Owner’s Operating Manual 23

PRE

IMINAR

4.1

Turning on the Power

1. Turn on your source components.

2. Plug the female end of the supplied power cord into the AC receptacle on the rear of

the Crystal Series LCD (AC 100V ~ 240V). See

Figure 2-2.

3. Connect the other end to your AC power source.

4. Turn on the main power switch at the rear of the display. The power indicator lights

red to indicate that the Crystal Series LCD is in “standby” mode.

5. Press the ON button on the remote control to

turn on the display (or press the power button

on the side of the display). The power indicator

lights solid green.

6. After a brief warm-up period (approximately 10

seconds), the Crystal Series LCD will display

an image.

4.2

Changing the OSD

Language

The Crystal Series LCD OSD language is initially set to English, but can also display the

menus in French, Spanish, Portuguese or German. To change the OSD language:

1. Press MENU.

2. Select Setup from the Main Menu.

3. Select OSD Language from the Setup Menu.

4. Press or to highlight the desired language and press ENTER. The change takes

effect immediately.

4. Operation

12 3

78 9

OFF ON

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 75 76

No comments

Runco CX-57HD User Manual Page 35