Runco XP-50DHD Specifications download pdf (Page 36)

Installation

24 PlasmaWall XP Series Owner’s Operating Manual

PRE

IMINAR

Digital Video Connection: The PlasmaWall has a dual HDMI input board, labeled HDMI

(SLOT 2). Connect the HDMI output from the DHD Controller to input “A” on this board,

using an HDMI-to-HDMI cable.

Some PlasmaWall XP Series models have a DVI input board (labeled DVI-D IN (SLOT 2))

in place of the dual HDMI input board. Connect the HDMI output from the DHD Controller

to this input, using a DVI-to-HDMI cable or equivalent cable/adapter combination.

RS-232 Connection: Connect the RS-232 output from the DHD Controller to the

SERIAL input on the PlasmaWall. Use a standard, modular telephone cable with RJ11

plugs at both ends. On the PlasmaWall end, use the provided RJ11-to-DB9 adapter. This

adapter is wired as shown in

Figure 3-6.

Figure 3-6. RS-232 Connection from the DHD Controller to the PlasmaWall

2, 5

XMT DATA

RCV DATA

REQUEST TO SEND

SIG GND

RCV DATA

XMT DATA

CLEAR TO SEND

NO CONNECTION

1, 6

1, 9

SIG GND

To/From

DHD

Controller

PlasmaWall

RJ-11 Male

DB-9 Female

1 5

6 9

SERIAL

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 79 80

No comments

Runco XP-50DHD Specifications Page 36