Runco PL-61DHD Installation Manual download pdf (Page 45)

Operation

Runco PlasmaWall Owner’s Operating Manual 35

PRE

IMINAR

Picture Use the controls in the Picture Menu to calibrate your PlasmaWall for optimum picture

quality.

The PlasmaWall has been designed to incorporate setup and calibration standards

established by the Imaging Science Foundation (ISF). The ISF has developed carefully

crafted, industry-recognized standards for optimal video performance and has

implemented a training program for technicians and installers to use these standards to

obtain optimal picture quality from Runco video display devices. Accordingly, Runco

recommends that setup and calibration be performed by an ISF certified installation

technician.

All signal types require separate processing. Therefore, you need to calibrate each input

separately. Runco recommends calibrating the PlasmaWall inputs in the following order:

1. Component SD

2. S-Video 1 / S-Video 2

3. Composite

4. HD/RGB 1 / HD/RGB 2

5. DVI 1 / DVI 2

Although it may be possible to obtain satisfactory picture quality using the naked eye and

regular program material, Runco recommends using the following calibration tools for best

results:

• External test pattern source -- Ovation Multimedia, Video Essentials or AVIA test DVD

(or equivalent).

• A blue filter (provided with many test DVDs), for color level and tint adjustments.

Connect your test pattern source to the input that you are calibrating and proceed as

follows. Perform the adjustments in the order listed here.

Brightness: On your external test pattern source, select a PLUGE pattern. (PLUGE is an

acronym for “Picture Line-Up Generation Equipment.”)

Figure 4-3 shows a typical PLUGE

pattern.

Figure 4-3. Typical PLUGE Pattern for Adjusting Brightness

Picture

Brightness

Contrast

Color

Tint

Sharpness

When you change a picture quality setting, save the change to a

preset afterwards. Otherwise, the change will be lost when a

different input is selected. (Picture quality settings are saved for

each input and resolution separately.) For information about saving

settings, refer to

ISF Presets on page 39.

Note

Below Black

Above Black

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 67 68

Comments to this Manuals

No comments

Runco PL-61DHD Installation Manual Page 45

Comments to this Manuals