22
Command
Name
Full Name RS-232C
Adjustment
Validity
Normal
Validity
Numerical
Direct
Validity
Description
A
AJN - ● Terminates the RS-232C installer adjustment mode.
AJY ADJUST: ON ● Starts the RS-232C installer adjustment mode.
AMN AUDIO MUTING: OFF ● ● Turns audio mute OFF.
AMY AUDIO MUTING: ON ● ● Turns audio mute ON.
AST AUTO SET UP MODE ○ Executes AUTO SETUP.
B
BHI B GAIN ○ ○ Adjusts BLUE GAIN HIGH-LIGHT.
BLW B OFFSET ○ ○ Adjusts BLUE OFFSET LOW-LIGHT.
BRA BAUD RATE: #####-232C ● Displays the current baud rate.
BRAS01 BAUD RATE: 1200-232C ○ Sets the UART setting to 232C (1200bps).
BRAS02 BAUD RATE: 2400-232C ○ Sets the UART setting to 232C (2400bps).
BRAS03 BAUD RATE: 4800-232C ○ Sets the UART setting to 232C (4800bps).
BRAS04 BAUD RATE: 9600-232C ○ Sets the UART setting to 232C (9600bps).
BRAS05 BAUD RATE: 19200-232C ○ Sets the UART setting to 232C (19200bps).
BRAS06 BAUD RATE: 38400-232C ○ Sets the UART setting to 232C (38400bps).
BRT BRIGHTNESS: *** ○ ○ Adjusts brightness.
BSL B SIDEBAR ADJ. LEVEL ○ ○ Adjusts BLUE SIDEBAR ADJUST LEVEL.
C
CFR FREQ. ADJ.: *** ○ ○ Adjusts the clock frequency (PLL frequency).
CGB C. DETAIL BLUE: *** ○ ○ Adjusts color detail BLUE.
CGC C. DETAIL CYAN: *** ○ ○ Adjusts color detail CYAN.
CGG C. DETAIL GREEN: *** ○ ○ Adjusts color detail GREEN.
CGM C. DETAIL MAGENTA: *** ○ ○ Adjusts color detail MAGENTA.
CGR C. DETAIL RED: *** ○ ○ Adjusts color detail RED.
CGY C. DETAIL YELLOW: *** ○ ○ Adjusts color detail YELLOW.
CLS COLOR SYSTEM: ##### ● Displays the current color system.
CLSS01 COLOR SYSTEM: AUTO ○ Sets the color system to AUTO.
CLSS02 COLOR SYSTEM: NTSC ○ Sets the color system to NTSC.
CLSS03 COLOR SYSTEM: PAL ○ Sets the color system to PAL.
CLSS04 COLOR SYSTEM: SECAM ○ Sets the color system to SECAM.
CLSS05 COLOR SYSTEM: 4.43NTSC ○ Sets the color system to 4.43NTSC.
CLSS06 COLOR SYSTEM: PAL M ○ Sets the color system to PAL M.
CLSS07 COLOR SYSTEM: PAL N ○ Sets the color system to PAL N.
CM1 NORMAL ○ ○ Sets the Normal color mode.
CM2 ISF ○ ○ Sets the ISF color mode (retake).
CNT CONTRAST: *** ○ ○ Adjusts contrast.
COF COLOR OFF: ******** ● Displays the current COLOR OFF setting.
COFS00 COLOR OFF: DISABLE ○ Disables COLOR OFF.
COFS01 COLOR OFF: ENABLE ○ Enables COLOR OFF.
COL COLOR: *** ○ ○
CPH PHASE ADJ.: *** ○ ○ Adjusts the phase (PLL phase).
How to read this table:
• RS-232C Adjustment Validity: Indicates whether or not the RS-232 adjustment mode can be used.
• Normal Validity: Indicates whether or not the normal-operation mode can be used
• Numerical Direct Validity: When a number (3-digit number) is attached to the end of a command, the command can
directly set that adjustment value.
○ or ●: Valid No Mark: Invalid NOTE: ● = values not stored in the last memory
RS-232C Commands
Comments to this Manuals