Runco DR-300c User Manual download pdf (Page 30)

6. Additional Information

Runco CL-710/ CL-710LT User’s Manual

6. Additional Information

Warning Message

Replace the Lamp (Contact your Runco Dealer)

■ It is normal for lamp to be darker when this unit

has been used for a period of time.

■ " Lamp life is expired ! Please change a new lamp.

And reset the lamp timer" message will be

displayed for 30 seconds on the screen if the lamp

has operated for 950 hours.

■ " Please change the lamp, Lamp will exceed its

lifetime after (hours):" message will be displayed

on the screen for 30 seconds for each time turning

on, if the lamp has operated for 980 hours. And

the number will count down continuously.

■ "Please change the lamp !" message will display on

the screen all the time and the POWER LED will

blink in orange and green sequentially if the lamp

has operated for more than (1,000) hours.

■ The power will turn off automatically after 10

minutes.

1. Loosen the screw of

front lamp cover

2. Take off the front lamp

cover.

3. Loosen the two

screws of lamp

module.

4. Pull out the lamp

module horizontally.

5. Insert the new lamp

module into this

projector

horizontally until it

is securely in place.

6. Tighten the two screws

of lamp module.

Lamp life is expired !

Please change new lamp

And reset the lamp timer

Please change the lamp !

Lamp will exceed its

lifetime after (hours):

Please change the lamp !

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Runco DR-300c User Manual Page 30

Comments to this Manuals

Related products and manuals for Data projectors Runco DR-300c