Runco CW-61 User Manual download pdf (Page 27)

Adjusting the Color to the Desired Level

Use this procedure to adjust the white balance for each color temperature to achieve the desired color quality.

Example: Adjusting the “RED GAIN” of “9300K” color temperature.

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

Perform Steps 1-3 of KELVIN, then...

4. Press the MENU button. The “WHITE BALANCE” screen appears.

5. Use the and buttons to select “RED GAIN”.

6. Adjust the white balance using the and buttons.

* If neither the

and buttons is pressed within 5 seconds, the current setting is set and the previous screen

reappears.

7. Once the adjustment is completed...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

OSD (On Screen Display) Controls

RED GAIN 60

GREEN GAIN 61

BLUE GAIN 60

RED OFFSET 50

GREEN OFFSET 50

BLUE OFFSET 50

RESET : OFF

WHITE BALANCE

SEL. ADJ. RETURN

EXIT

KELVIN 6500K

RED GAIN 0

Information

■ Adjusting the white balance

R/G/B GAIN ..... White balance adjustment for signal level

R/G/B OFFSET . .White balance adjustment for black level

RESET .................... Resets settings to the factory default

values. Use and buttons to select

“ON”, then press the MENU button.

■ Restoring the factory default settings

Select “RESET” under the WHITE BALANCE menu.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 69 70

No comments

Runco CW-61 User Manual Page 27