Runco CW-43MC Specifications download pdf (Page 25)

Command

Name

Full Name RS-232C

Adjustment

Validity

Normal

Validity

Numerical

Direct

Validity

Description

FMK SCREEN MASK: ##### ● Displays the current SCREEN MASK setting.

FMKS00 SCREEN MASK: OFF ○ Sets the SCREEN MASK to OFF.

FMKS02 SCREEN MASK: INVERSE ○ Sets the SCREEN MASK to INVERSE (negative-positive inversion)

FMKS03 SCREEN MASK: WHITE ○ Turns ON the WHITE mask.

FMKS04 SCREEN MASK: RED ○ Turns ON the RED mask.

FMKS05 SCREEN MASK: GREEN ○ Turns ON the GREEN mask.

FMKS06 SCREEN MASK: BLUE ○ Turns ON the BLUE mask.

FMKS07 SCREEN MASK: YELLOW ○ Turns ON the YELLOW mask.

FRC FRC: ##### ● Displays the current FRC setting.

FRCS01 FRC: MODE1 ○ Sets FRC to MODE1.

FRCS02 FRC: MODE2 ○ Sets FRC to MODE2

FRCS03 FRC: MODE3 ○ Sets FRC to MODE3

FRP FRESH POSITION ○ Initializes the integrator and SCREEN adjustment values.

FXO AUDIO LEVEL OUT: FIX ○ Selects xed audio output.

GHI G. GAIN: *** ○ ○ Adjusts the G. GAIN High.

GLW G. OFFSET: *** ○ ○ Adjusts the G. OFFSET High.

GPI (GET PICTURE DATA) ● ● Gets installer PICTURE data.

GPS (GET POSITION DATA) ● ● Gets installer SCREEN data.

GRA GAMMA: ###### ● Displays the current GAMMA setting.

GRAS01 GAMMA: 2.0 ○ Sets the GAMMA to “2.0’

GRAS02 GAMMA: 1.8 ○ ○ Sets the GAMMA to “1.8’

GRAS03 GAMMA: 2.2 ○ ○ Sets the GAMMA to “2.2’

GRAS04 GAMMA: DRE MID ○ Sets the GAMMA to “DRE MID’ (dynamic range expander)

GRAS05 GAMMA: DRE HIGH ○ Sets the GAMMA to ‘DRE HIGH’

GRAS06 GAMMA: DRE LOW ○ Sets the GAMMA to ‘DRE LOW’

GRAS07 GAMMA: HIGH CNT. ○ Sets the GAMMA to “HIGH CONTRAST’

GSL G. SIDEBAR ADJ. LEVEL: *** ○ ○ Adjusts the GREEN SIDEBAR ADJ.

GSO (GET STATUS OPTION DATA) ● ● Gets OPTION data.

GSS (GET STATUS SETUP DATA) ● ● Gets SETUP data.

GST (GET STATUS) ● ● Gets STATUS.

GWB (GET WHITE BAL DATA) ● ● Gets installer adjust WHITE BALANCE data.

HPS H. SHIFT ○ ○ Adjusts H. SHARPEN.

HSI V. SHIFT ○ ○ Adjusts V. SHARPEN.

IDC ID CLEAR ○ Clears the ID.

DS ID No. Set: ** ○ ○ Sets the ID.

IN1 INPUT1 ○ ○ Switches the main screen to INPUT1.

IN2 INPUT2 ○ ○ Switches the main screen to INPUT2.

IN3 INPUT3 ○ ○ Switches the main screen to INPUT3.

IN4 INPUT4 ○ ○ Switches the main screen to INPUT4.

IN5 INPUT5 ○ ○ Switches the main screen to INPUT5.

INP INPUT# ● ● Displays the current input function for the main screen.

INPS01 INPUT1 ○ ○ Switches the main screen to INPUT1.

INPS02 INPUT2 ○ ○ Switches the main screen to INPUT2.

INPS03 INPUT3 ○ ○ Switches the main screen to INPUT3.

INPS04 INPUT4 ○ ○ Switches the main screen to INPUT4.

INPS05 INPUT5 ○ ○ Switches the main screen to INPUT5.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Comments to this Manuals

No comments

Runco CW-43MC Specifications Page 25

Comments to this Manuals

Related products and manuals for TVs & monitors Runco CW-43MC