Runco CW-42HD User Manual download pdf (Page 43)

Operation

Runco CinemaWall Owner’s Operating Manual 33

PRE

IMINAR

Color Chart: Select Color Chart from the Picture Adjust menu to adjust the hue and color

density for each of the six primary colors: red, green, blue, yellow, magenta and cyan.

Changing these settings for a primary color alters the hue of that color and affects the

gamut (range) of possible colors. For example, changing the value for red moves the color

closer to either yellow or magenta, which in turn affects all displayed colors having a red

component.

Cinema Mode: When you enable Cinema Mode, the CinemaWall automatically detects

and optimizes the display of interlaced video signals that originated from film. To disable

Cinema Mode, set it to OFF.

Picture Memory: The CinemaWall provides four, preset picture memories per input that

allow you to quickly change the image settings to suit the viewing environment:

• Select ISF DAY or ISF NIGHT when watching video in a dark room. These settings

provide darker, finer pictures, like the screen in movie theaters. For a darker image,

select ISF NIGHT.

• Select NORMAL when watching video in a bright room. This mode provides dynamic

pictures with distinct differences between light and dark sections.

• The FILM setting is similar to NORMAL but produces a brighter picture.

• To reset all image settings to their factory defaults, select CUSTOM1.

Memory Setting: Choose Memory Setting from the Picture Adjust menu to store the

current input and image quality settings in one of six memory locations. These memory

locations are global (that is, shared by all inputs). You can recall these settings at a later

time, without manually recreating them.

You should save changes to any of the following settings to a picture memory; otherwise

they will be lost when a new input source is selected:

• Contrast/Brightness

• Color saturation/Tint

• Sharpness

•Gamma

• Color temperature and white balance

•Aspect ratio

To store settings to a picture memory:

1. Select Memory Setting from the Picture Adjust menu.

2. Use the left- and/or right-arrow buttons to select a memory location (1 through 6).

3. Press OK or MENU on the remote control. The Picture Memory screen appears.

4. Use the left- and/or right-arrow buttons to select SET, then press OK or MENU.

5. If desired, enter a brief note (up to 15 characters long) describing the stored settings.

To do this:

a Use the left- and/or right-arrow buttons to select NOTE, then press OK or MENU.

b Use the up- and/or down-arrow buttons to select the character. Use the left- and/or

right-arrow buttons to change the cursor position. Press EXIT (

) to insert a space

or delete a character at the current position.

c When you have finished entering the note, press OK or MENU.

To recall a picture memory setting, perform Steps 1 and 2 above.

RED Y M 32

GREEN C Y 32

BLUE M C 32

YELLOW G R 32

MAGENTA R B 32

CYAN B G 32

RESET : OFF

COLOR CHART

SEL. ADJ. RETURN

EXIT

SEL.

MEMORY SETTING

1 / 2

MEMORY1 SET RESET

INPUT : DVD/HD1

SIGNAL : 480P

NOTE : DVD/STAR WARS

MEMORY2

INPUT : —

SIGNAL : —

NOTE : —

MEMORY3

INPUT : —

SIGNAL : —

NOTE : —

RETURN

EXIT

MENU/ENTER

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 65 66

Comments to this Manuals

No comments

Runco CW-42HD User Manual Page 43

Comments to this Manuals

Related products and manuals for Televisions Runco CW-42HD