Runco CW-42HD User Manual download pdf (Page 40)

Operation

30 Runco CinemaWall Owner’s Operating Manual

PRE

IMINAR

Select Color from the Picture Adjust menu. While looking at the color bar pattern through

a blue filter, adjust the color saturation level until the outermost (gray and blue) color bars

appear to be a single shade of blue:

Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image.

When tint is decreased, the image appears redder; when it is increased the image

appears greener. To set the tint, select Tint from the Picture Adjust menu. While looking at

the color bar pattern through a blue filter, adjust the tint level until the cyan and magenta

color bars (on either side of the green bar) appear to be a single shade of blue.

Like the brightness and contrast controls, the color and tint controls

are interactive. A change to one may require a subtle change to the

other in order to achieve the optimum setting.

gray

yellow

cyan

green

magenta

red

blue

Note

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 65 66

No comments

Runco CW-42HD User Manual Page 40