Runco CW-42HD User Manual download pdf (Page 44)

Operation

34 Runco CinemaWall Owner’s Operating Manual

PRE

IMINAR

Audio To adjust the bass, treble and left/right balance, or to assign the CinemaWall audio inputs

to the video inputs, select Audio from the Main Menu and press OK or MENU.

Bass: To adjust the low-frequency response, select Bass from the Audio Menu and use

the left- and/or right-arrow buttons to adjust the amount of bass in the audio signal.

Treble: To adjust the high-frequency response, select Treble from the Audio Menu and

use the left- and/or right-arrow buttons to adjust the amount of treble in the audio signal.

Balance: To adjust the left/right speaker balance, select Balance from the Audio Menu

and use the left- and/or right-arrow buttons to make one channel louder than the other.

Audio Input 1/2/3: This menu lets you assign each audio input on the CinemaWall to a

video input. Doing so causes that audio signal to be heard through the speakers when the

associated video input is selected.

For example, if a DVD player’s video output is connected to the DVD/HD1 input on the

CinemaWall and its audio output is connected to audio input 2, select AUDIO INPUT 2

from the Audio menu. Then, use the left- and right-arrow buttons to assign it to DVD/HD1.

DVD/HD3 Input / DVD/HD4 Input: If you are using these inputs to connect an

HDMI-capable component, select HDMI to route the HDMI (digital) audio signal to the

speakers when DVD/HD3 or DVD/HD4 is selected.

Select INPUT 1-3 if the HDMI component’s analog audio out is connected to INPUT 1,

INPUT 2 or INPUT 3.

Image Options Use the controls in the Image Options menu to perform advanced image quality

adjustments and access various other CinemaWall features.

Aspect Ratio: To change the aspect ratio (size and shape) of the projected image, select

Aspect Ratio from the Image Options Menu and press OK or MENU. Select the

appropriate aspect ratio for the type of program material being viewed; refer to

Table 4-1.

➤

BASS 0

TREBLE 0

BALANCE 0

AUDIO INPUT1 : VIDEO 1

AUDIO INPUT2 : DVD/HD 1

AUDIO INPUT3 : RGB

DVD/HD3 INPUT : HDMI

DVD/HD4 INPUT : HDMI

AUDIO

SEL. ADJ. RETURN

EXIT

You cannot assign two or more audio inputs to the same video

input.

Note

➤

ASPECT RATIO : VRTWIDE

V SHIFT 0

H SHIFT 0

V-SIZE 0

H-SIZE 0

COMPUTER : OFF

FINE PICTURE 0

PICTURE ADJ 0

IMAGE OPTIONS

SEL. ADJ. RETURN

EXIT

When you change the aspect ratio, save the change to a preset

afterwards. Otherwise, the change will be lost when a different

input is selected. (The aspect ratio is saved for each input and

resolution separately.) For information about saving settings, refer

Memory Setting on page 33.

Note

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 65 66

Comments to this Manuals

No comments

Runco CW-42HD User Manual Page 44

Comments to this Manuals

Related products and manuals for Televisions Runco CW-42HD