Runco CW-42HD User Manual download pdf (Page 47)

Operation

Runco CinemaWall Owner’s Operating Manual 37

PRE

IMINAR

Color System: Select Color System from the Install menu to specify the color system for

composite video (VIDEO 1) or S-Video (VIDEO 2) input signals.

Different countries use different formats for video signals. Select the appropriate color

system for your country:

• AUTO: The color systems are automatically identified and the format is set accordingly.

• PAL: This is the standard format used mainly in the United Kingdom and Germany.

•SECAM: This is the standard format used mainly in France and Russia.

• 4.43 NTSC, PAL60: This format is used for videos in countries using PAL and SECAM

video signals.

•3.58 NTSC: This is the standard format used mainly in the United States and Japan.

• PAL-M: This is the standard format used mainly in Brazil.

• PAL-N: This is the standard format used mainly in Argentina.

Blank Field: Select Blank Field from the Install menu to choose the color (BLACK or

GRAY) that is displayed when no input signal is present.

Sidebar Adjust: Select Sidebar Adjust from the Install menu to adjust the gray level for

the sides of the screen when the Aspect Ratio is set to Standard 4:3 (refer to

Table 4-1).

The range is from 0 (black) to 15 (light gray). The default setting is 3 (dark gray).

S1/S2 (S-Video signals only): If an incoming S-video signal contains screen size

information, the CinemaWall can use that information to automatically adjust the image

size to fit the screen. To enable this feature, select S1/S2 from the Install menu and set it

to AUTO. To disable it, set it to OFF.

Display OSD: When you select an aspect ratio or input with the remote control, the

CinemaWall displays your selection on-screen. When you adjust the volume, a slidebar

appears as a visual indicator of the level. When you press DISPLAY on the remote

control, the CinemaWall displays the currently-selected aspect ratio and input on-screen.

To prevent the display of these items, select Display OSD from the Install menu and set it

to OFF.

OSD Adjust: To adjust the position of the on-screen menus, select OSD Adjust from the

Install menu. The range is from 1 (top left) to 6 (bottom right).

Remote ID: This menu item is reserved for future use.

Factory: To restore the CinemaWall to its factory-default state, select Factory from the

Install menu and set it to ON. “SETTING NOW” appears on the screen during the reset,

then disappears when the reset is complete.

All CinemaWall settings revert to their default values, with the following exceptions:

• Image Options: Aspect Ratio, Computer

• Install: Language, HD Type, HDMI, Color System

Setting Blank Field to GRAY makes it easier to see whether the

display is turned off, or turned on and not receiving a signal.

Tip

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 65 66

Comments to this Manuals

No comments

Runco CW-42HD User Manual Page 47

Comments to this Manuals

Related products and manuals for Televisions Runco CW-42HD