Runco Q-750d Ultra Series Specifications download pdf (Page 73)

Operation

Q-750d Ultra Series Installation/Operation Manual 57

PRE

IMINAR

Cinema CINEMA Select Cinema to view 2.35

source material in its native

aspect ratio.

With a 16:9 screen and a

standard Q-750d Ultra (without

an anamorphic lens), the upper

and lower portions of the screen

are masked, but the geometry of

the active image area is

unchanged.

With a 2.35:1 screen and an

anamorphic lens, the DHD

Controller scales the 2.35:1

image so that the active image

area fills the 16:9 chip surface,

eliminating the black bars. The

secondary, anamorphic lens

then restores the proper

geometry to the 2.35:1 image.

Virtual Cinema V-CINE A 16:9 image is scaled

NON-linearly (more on the sides

than in the center) to fit a 2.35:1

screen.

Native NATIVE Select Native to display the

source signal in its native

resolution, centered in the

display area with no re-sizing or

overscan.

This means, for example, that

720p HDTV programs will

display with unused pixels on all

sides: 320 on the left and right

sides and 180 above and below.

With SDTV and EDTV sources,

the DHD Controller scales the

image horizontally to achieve a

16:9 aspect ratio.

Table 4-1. Aspect Ratio Settings (continued)

Aspect Ratio

Remote

Control

Key

Description

2.35:1 Image on

16:9 Screen

(Cinema aspect ratio / no CineWide)

2.35:1 Image on

2.35:1 Screen

(

Cinema aspect ratio / CineWide)

16:9 Image on

2.35:1 Screen with

Virtual Cinema

16:9 Image on

2.35:1 Screen

16:9 Image on

2.35:1 Screen

1080i HDTV Image

720p HDTV Image

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 133 134

Comments to this Manuals

No comments

Runco Q-750d Ultra Series Specifications Page 73

Comments to this Manuals

Related products and manuals for Data projectors Runco Q-750d Ultra Series