Runco Q-750d Ultra Series Specifications download pdf (Page 86)

Operation

70 Q-750d Ultra Series Installation/Operation Manual

PRE

IMINAR

•PCE: To use the Personal Color Equalizer to define a custom color gamut, choose the

“PCE” Color Gamut setting (refer to Color Gamut on page 69). Then, choose PCE

from the Display Color - Common Settings menu and press ENTER.

• Hue/Saturation/Level: PCE provides the ability to define a custom color gamut in

terms of primary (red, green and blue) and secondary (yellow, cyan and magenta)

color hues, saturation and level (brightness).

Each control operates only on the color specified. Surrounding colors are linearly

interpolated based on their distance from each of these colors. In the CIE 1931 Yxy

coordinate system (see Figure 4-8), Hue rotates the color coordinates around the

white point, Saturation adjusts the coordinate's distance from white and Level

adjusts the luminance (Y) of the color relative to white.

Figure 4-8. Effect of PCE Hue and Saturation Controls

• RSC™ (Runco Smart Color): Set RSC to On to to improve the accuracy of flesh

tones and increase color saturation, without sacrificing the purity of other colors.

The DHD Controller uses the PCE settings for all display modes on

a given input.

Note

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8

Hue

Saturation

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 133 134

No comments

Runco Q-750d Ultra Series Specifications Page 86